The IMI220-410A001 module is a peripheral unit used to control 16 24 VDC digital inputs; more than one of this type of module can be installed on the rack as each one is linked to a different identifier.
Coding external: 6, 7, 8.
Connection by means of: IMI220-410A001 (18 pin 5.08 mm connector).
Use: more than one IMI220-410A001 module can be installed on the bus; this module can be optional.
Configuration parameters: module code and revision, identifier.
Characteristics of the module
|
Input circuits |
16 (sink) |
|
In groups of |
16 |
|
Input voltages |
+ 24 VDC |
|
- range |
± 20% |
|
- ON level |
> 11 VDC |
|
- OFF level |
< 11 VDC |
|
- frequency |
500 Hz |
|
Input current |
|
|
- ON level |
7 mA @ 24 VDC |
|
Delay time (typ.) |
|
|
- from "0" to "1" |
2 ms |
|
- from "1" to "0" |
2 ms |
|
Interrupt |
no |
|
Visual indicator |
16 green LEDs (input side) |
|
Galvanic separation |
no |
|
Reverse polarity protection |
yes |
|
Common points between channels |
0V24 |
|
Effects of incorrect input terminal connection (1) |
none |
|
Type of input |
type 2 |
|
Effects when withdrawing/inserting input module under power |
possible damage of the module and CPU program interruption |
|
Additional external load when interconnecting inputs and outputs, if needed |
dependent on the output |
|
Signal evaluation |
|
|
- static |
multimeter |
|
- dynamic |
oscilloscope |
|
Front connector |
18 pins M, pitch 5.08 mm |
|
Cables section |
|
|
- material |
copper |
|
- clamping range (min/max) |
0.08...2.5 mm² |
|
- rigid H05(07) V-U |
0.5...2.5 mm² |
|
- flexible H05(07) V-K |
0.5...2.5 mm² |
|
- flexible with terminal according to DIN 46228/1 |
0.5...2.5 mm² |
|
- flexible with insulating collar according to DIN 46228/4 |
0.5...1.5 mm² |
|
Cable length |
|
|
- shielded |
500 m |
|
- non-shielded |
250 m |
|
Bus absorbed current |
|
|
- typical |
35 mA |
|
Operating temperature |
|
|
- in vertical position |
0...60° C |
|
- in horizontal position |
0...40° C |
|
Dimensions L x H x D (mm) |
25 x 130 x 95 |
|
Weight |
0.160 Kg |