|
|
The IMI220-425A001 module is used to control 4 12 bit analog outputs, with a working range between -10000 VDC and +10000 VDC. The analog outputs are independent and can be programmed as simple DAC or PID controllers; there is the possibility of filtering the output signal by means of a Butterworth type filter with a pole.
External coding: 2, 3, 4.
Connection by means of: IMI220-425A001 (9 pin, 5.08 mm connector).
Use: more than one IMI220-425A001 module can be installed on the bus; this module can be optional.
Calibration parameters: minimum voltage, minimum quota, maximum voltage, maximum quota.
Characteristics of the module
|
Static specifications |
|
|
Output |
4 |
|
Output impedance |
30 Ω |
|
Output range |
|
|
- voltage |
-10V…+10V |
|
- current (max) |
± 80 mA |
|
Analog output error |
|
|
- max error @ 25° C |
100 mV @ FS |
|
- temperature factor |
2 mV/°C |
|
Max error on the whole temperature range |
70 mV |
|
Digital accuracy |
12 bit |
|
Format of data returned by the application program |
INT |
|
LSB value |
4.9 mV |
|
Dynamic specifications |
|
|
Total system transfer time |
250 µs |
|
Settling time for a full scale change |
100 µs |
|
Overshoot |
0.2% |
|
Main specifications |
|
|
Type of protection |
electronic for short circuit |
|
Current |
|
|
- +5 V |
52 mA |
|
- +15 V |
15 mA |
|
- -15 V |
15 mA |
|
Front connector |
9 pin M, pitch 5.08 mm |
|
Cables section |
|
|
- material |
copper |
|
- clamping range (min/max) |
0.08...2.5 mm² |
|
- rigid H05(07) V-U |
0.5...2.5 mm² |
|
- flexible H05(07) V-K |
0.5...2.5 mm² |
|
- flexible with terminal according to DIN 46228/1 |
0.5...2.5 mm² |
|
- flexible with insulating collar according to DIN 46228/4 |
0.5...1.5 mm² |
|
Common points between channels |
0V15 |
|
Output response during start/stop |
0V |
|
Operating temperature |
|
|
- in vertical position |
0...60° C |
|
- in horizontal position |
0...40° C |
|
Dimensions W x H x D (mm) |
25 x 130 x 95 |
|
Weight |
0.150 Kg |
|
Common specifications |
|
|
Interference between channels |
|
|
- d.c. |
100 dB |
|
- 50 Hz |
100 dB |
|
- 60 Hz |
100 dB |
|
Repeatability at fixed temperature after a duration |
% di FS |
